Quantum Leap II

 Quantum Leap II
  • Click to enlarge

$249.95


Product Information
Specification
Dia.: 3.0"
Height: See Below
Weight: See Below
MMT: 54mm Kwik-Switch

PML`s "quantum mechanics" have continued to improve one of rocketry`s favorite two-stagers, the Quantum Leap. The new Quantum Leap II, now with the new Interstage 3000 staging adapter system, is a completely modular two stage rocket. Once you assemble the four basic components, you can combine them to make any of five rocket combinations and can change to any configuration in minutes. The new Interstage 3000 system is much easier to prep and use than the previous interstage coupler design, and is identical in design to the IS3000 used in the Terrier booster stage for our MiniBBX. The IS3000 comes complete with timer mounts and remote safety switch.

This 2-stage rocket kit is intended for the experienced HPR scratch builder intending to supply his/her own electronic parachute deployment system into the sustainer stage. We strongly urge you not to fly this kit without an electronic parachute deployment system installed into the sustainer stage. Failure to do so will allow the sustainer stage to fall to earth without recovery deployment if the sustainer motor fails to ignite. If you are unsure about designing and installing your own electronic parachute deployment system, consider buying the Quantum Leap 3000 kit, which contains the electronic deployment components (except altimeter) as standard.

NOTE: The following chart lists configurations of this kit that may be flown as it is received stock from PML. However, your addition of an electronic deployment system may/will make some of these configurations unavailable, depending upon the design of your system.

Configuration Components Length Weight
##
CP Notes
A 1,3,5 49.25" 49 oz. 43" Booster stage requires use of payload section for stability
B 1,2 49.25" 46 oz. 39.5"  
C 1,3,2 61.25" 53 oz. 50.5"  
D 1,2,4,5 75.75" 88 oz. 53.5" Upper stage requires electronic ignition **
E 1,3,2,4,5 87.75" 95 oz. 65" Upper stage requires electronic ignition **
COMPONENTS LIST AND NOTES
  1. Nosecone
  2. Upper (sustainer) stage
  3. Payload section
  4. Interstage coupler/staging timer housing
  5. Booster stage
** PML AccuFire Timer recommended for upper stage ignition; see Electronics section in webstore. (Can also use Transolve ST-2B).
## Your weight may vary according to how much epoxy and paint you use when you build. Also does not include weight of staging timer (if required).

 


Interstage 3000 Coupler Detail

 

Both stages have...

  • Pre-slotted Quantum Tube airframe
  • G-10 fiberglass fins
  • "Kwik-Switch" motor mount
  • Piston ejection system
  • Nylon parachute

Also included...

  • 12" payload section
  • Plastic nosecone
  • Interstage 3000 stage coupler w/electronics bay*
  • Explicit instructions
Product Code 1466
Manufacturer Public Missiles
Stock Level 2
Condition New
Weight 12Lb

(Required)
This field is required.
Top

eCommerce by Rocket Power