Aerotech First Fire

First Fire

Aerotech First Fire Jr.(3 pack)

First Fire, Jr. Initiator (3-pak) For D-G Composite motors Only

Aerotech Firstfire Mini

First Fire Mini Initiator (3-pak) For Use With ALL A,B,C & D Motors  

Fat Boy

The Fat Boy is a powerful motor starter designed for use in applications of mid “J” and up – and we do mean UP!   It’s a stand-alone istarter which is frequently used un-augmented in “K”, “L” and “M” class motors.  No additional pyrogen needed.   The Fat Boy must have 12 volts to start.  The pyrogen is 1 inch long by 15/64 inch (.234) OD with 36-inch leads.  It burns very hot at 1,600 degrees F, creating generous smoke and sparks as it burns from top to bottom like a s…

First Fire Micro (3-pack)

First Fire Micro, for A,B,C,D quest motors, Ships USPS parcel post or fedex hazmat only. 

Slim Gem

The Slim Gem is designed for use in “H” through mid “J” RMS or single use high-power motors. They must have 12 volts to start. The pyrogen is 1 inch long by 9/64 inch (.140) OD with 24-inch leads and made to fit those smaller nozzles. Using 12 volts, the Slim Gem will burst into flames at 1,600 degrees F, producing much smoke and sparks. Rapid combustion then consumes the remaining pyrogen similar to a sparkler. They will reliably start sugar motors, composites, black powder or anything …

Super Fat Boy

The Super Fat Boy is stand-alone motor starter which is used un-augmented in “M” or larger motors.   No additional pyrogen needed.   The Super Fat Boy must have 12 volts to ignite.  The pyrogen is 1 1/4 inches long by 19/64 inch (.297) OD with 60-inch leads.  It burns very hot at 1,600 degrees F, creating generous smoke and sparks as it burns from top to bottom like a sparkler.  It is moisture and shock resistant, reliable, and durable.  The sky’s the limit for this baby!  It will …

Twiggy

The Twiggy motor starter is designed for those 29mm “F” and “G” class Single Use or RMS motors.  Its unique oval shape and the 22-gauge wire allows for insertion through the smaller nozzles to bottom out into the “C slot” grain geometry found in these engines.  Approximate measurements: 1/2 inch long and 1/8 inch OD (.125) at the widest point.  The thickness of the oval is approximately 3/32 inch (or .093) with 15-inch leads.  Using 12 volts, these high energy motor starters…