Celebrating 35 years of LOC - we bring back an old favorite! The LaserLOC series was one of the first production minimum diameter kits available to the public. Keeping the tradition going we have a few modern day tweaks that will put your skills to the test. A gentle laser etch around the slots allow for easier glassine removal. Multi-slot airframe allow the fins to click into the booster. Precut 4oz fiberglass cloth can be easily epoxied from fin-airframe-fin. This reinforcement will give your LaserLOC the strength for today's higher impulse motors. Fiberglass should be applied with a long cure epoxy for best results. If you have never glassed anything before, here's your chance! The booster is a zipperless design. 1/4" Launch lugs included. Fly away rail guides are another alternative.
Strong enough for supersonic flights. Light enough on your wallet and to fly an E motor!!!
Complexity: Expert
Diameter: 1.6″
Height: 42.5
Weight: 13oz.
Motor Mount: 38mm minimum diameter – MMA-2 29mm adaptor included
Parachute Size: 21" Ripstop Nylon
Shock Cord Type:12′ 3/16″ Tubular Nylon with sewn loops
Shock Cord Mount: SCM-3
Fin Thickness: 1/8″
Ring Thickness: none-minimum diameter
Starter Recovery Blanket
Full Decals
Precision cut Fiberglass fin can reinforcement cloth
Instructions: Yes
Earn Reward Points: 65
Earn Discount: $1.95
